Very solid welded steel construction. Due to its design, the machine is extremely rigid and runs with a high degree of synchronism, which means that it closes nearly parallel under full off-center load with full operating pressure.
Each pair of columns is connected with a tension rod. The downwards movement of the rension rod is actuated by one lateral hydraulic cylinder.
With automatic central lubrication for the column guidance. The beam is powered by a hydraulic cylinder. The beam return travel is infinitely adjustable. The electric control cabinet is mounted to one side of the machine. The operator’s panel to control all movements and functions is arranged on the front side of the control cabinet. A Siemens PLC controls the various movements.
Features
- Operator’s guidance
- Clear text error display
- Preselected stroke counter
- Total stroke counter
- 4 mechanical low point limits, automatically adjustable, adjusting accuracy 0,1 mm
- Automatic adjustment to cutting die height
- Safety light curtain for protection and cutting stroke release
- Cutting stroke release selectrive via 1-cycle resp. 2-cycle operation or via a push button
- Protective guarding in accordance with the European Standards
- Electric control cabinet built according to EN-rules 60204
- Plastic cutting board D75
Accessories
- Cutting stroke release via foot switch
- Automatic motorized cutting board oscillation
- Stationary cutting die holding brackets
- Adjustable cutting die holding brackets
- Operator’s lamp
- Steel cutting plate
