Extremely solid welded steel construction. The stroke movement and the cutting force are provided via two hydraulic cylinders, arranged in the machine base.
The up-stroke table is guided by means of a centralized column guidance. The beam travel is powered by a motoric driven swivel lever, therefore harmonic travel motion. The electric control cabinet is mounted to one side of the machine.
The operator’s panel to control all movements and functions as well as all electric operating and control elements are arranged on the front side of the control cabinet. A “Siemens” PLC controls the various movements.
Features
- Trilingual operator’s guidance
- Clear text error display
- Preselect stroke counter
- Total stroke counter
- Cutting die storage for 9 different cutting die heights
- Automatic adjustment to the cutting die height with memory functio
- Safety light curtain for protection and cutting stroke release
- Cutting stroke release selective via 1-cycle resp. 2-cycle operation or via a push button
- Protective guarding in accordance with the European Standards
- The electric control cabinet is built according to the EN-rules 60204
Accessories
- Cutting Stroke Relase with foot switch
- 4 mechanical low point stops - Central overall adjustment via motor. The useable cutting width is reduced by 200 mm. (Machine is prepared for retrofitting).
- Plastic Cutting Board, 10 mm thick Quality: D 85
- Automatic Cutting Board Oscillation - For oscillating the cutting board several degrees after each cutting cycle. This prevents the die from cutting into the same lines all the time, increasing the service life of the cutting board. The useable cutting width is reduced by the oscillating radius = 24 mm.
- Stationary cutting die holding brackets - Easily moveable under the beam to the corresponding cutting die width. Max. width of mounting platen = table width - 80 mm. Min. width of mounting platen = 300 mm.
- Operator’s Lamp
- Dust protection
