Welded steel construction with 4 columns and stationary beam. The hydraulic cylinders are installed in the machine base and are acting via tie-bars and columns onto the beam. Mechanical plane-parallel guidance of the beam during the stroke.
With 4 mechanical low point stops with automatic overall adjustment. Adjusting accuracy 0,1 mm.
The electric operating and control elements are installed at the front side of the control panel. All individual movements are controlled by a Siemens PLC. With protective guarding in correspondence with the European regulations. The electric control cabinet is built according to the EN-rules 60204.
The oil-hydraulic power unit contains pump, motor and hydraulic control valves, which are mounted to a carrier plate on top of the welded oil container. The hydraulic power unit is a separate unit. Without oil filling.
With 4 mechanical low point stops with automatic overall adjustment. Adjusting accuracy 0,1 mm.
The electric operating and control elements are installed at the front side of the control panel. All individual movements are controlled by a Siemens PLC. With protective guarding in correspondence with the European regulations. The electric control cabinet is built according to the EN-rules 60204.
The oil-hydraulic power unit contains pump, motor and hydraulic control valves, which are mounted to a carrier plate on top of the welded oil container. The hydraulic power unit is a separate unit. Without oil filling.
